₹ 411.00
| Model Type | Arduino Leonardo |
| Microcontroller Chip | ATmega32u4 |
| Operating Voltage | 5 |
| Input Voltage(Recommended) | 7V-12V |
| Input Voltage (limit) | 6V-20V |
| Analog I/O Pins | 12 |
| Digital I/O Pins | 20 |
| PWM Digital I/O Pins | 7 |
| DC Current per I/O Pin | 40 mA |
| DC Current for 3.3V Pin | 50 mA |
| Clock Speed | 16 MHz |
| Flash Memory | 32 KB (ATmega32u4) of which 4 KB used by bootloader |
| SRAM | 2.5 KB |
| EEPROM | 1 KB |
| Dimensions in mm (LxWxH) | 68x54x20 |
| Weight (gm) | 20 |
₹ 205.00
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹ 240.00
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- Package Includes :
- 1 x Pro mini 5v/16mHZ compatible
₹ 240.00
- Microcontroller : ATmega328 SMD.
- Operating Voltage : 5V.
- Supply Voltage recommended : 7-12V DC.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
- DC Current per I/O Pin : 40 mA.
- DC Current for 3.3V Pin : 50 mA.
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
- SRAM : 2 KB (ATmega328).
- EEPROM : 1 KB (ATmega328).
- Clock Speed : 16 MHz.