Showing all 8 results

  • View as:
  • Sidebar
  • Sort by:
 110.00 +GST

AVAILABILITY: In stock

 398.00 +GST

AVAILABILITY: In stock

 398.00 +GST
  1. Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM.
  2. External Storage: micro SD card slotup to 4GB.
  3. Camera
    • FPC connector.
    • Support for OV2640 (sold with a board) or OV7670 cameras.
    • Image Format: JPEG(OV2640 support only ), BMP, grayscale.
    • LED flashlight.
  4. Expansion: 16x through-holes with UART, SPI, I2C, PWM.
  5. Misc: Reset button.
  6. Power Supply: 5V via pin header.
  7. Power Consumption.
    1. Flash LED off: 180mA @ 5V.
    2. Flash LED on to maximum brightness: 310mA @ 5V.
    3. Deep-sleep: 6mA @ 5V min.
    4. Modem-sleep: 20mA @ 5V min.
    5. Light-sleep: 6.7mA @ 5V min.
  8. Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm.
  9. Temperature Range: Operating: -20 ~ 85 ; storage: -40 ~ 90 @ <90%RH.
 160.00 +GST

AVAILABILITY: In stock

 160.00 +GST
  • Power Input: 4.5V ~ 9V (10VMAX), USB-powered
  • Transfer Rate: 110-460800bps
  • Support UART / GPIO data communication interface
  • Support Smart Link Smart Networking
  • Working temperature: -40°C ~ 125°C
  • Drive Type: Dual high-power H-bridge
  • Don’t need to download resetting
  • A great set of tools to develop ESP8266
  • Flash size: 4MByte
  • Lowest cost WI-FI
 240.00 +GST

AVAILABILITY: In stock

 240.00 +GST
  • WiFi Module: ESP-12E
  • Processor: ESP8266
  • CP2102 Chip
  • Built-in Flash: 32Mbit
  • Antenna: Onboard PCB antenna
  • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
  • WiFi Protocol: IEEE 802.11 b/g/n
  • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
  • WiFi Mode: Station / SoftAP / SoftAP Station
  • Power Supply: 5V
  • Logic Level: 3.3V
 155.00 +GST

AVAILABILITY: In stock

 155.00 +GST
  • 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
  • 1 analog input(3.2V max input)
  • Micro USB connection
  • Use BRT (Bias Resistor Transistor), easier into flash mode.
  • 30% increase in radiating area, more stable.
  • Dimensions : 35 x 26 x 8 (LxWxH) mm.
  • Weight: 10 gm.
  • Board Color : Blue
  • Compatible with Arduino
  • Compatible with NodeMCU
  • Compatible with MicroPython
 250.00 +GST

AVAILABILITY: In stock

 250.00 +GST
MicrocontrollerESP8266
Digital I/O Pins11
Operating Voltage(VDC)3.3
Analog I/O Pins1
Flash Memory4 MB
Dimensions in mm (LxWxH)68x54x12
Weight (gm)20
Shipment Dimensions6 6 2 cm