₹ 41.00
- Operating Voltage (VDC) : 3.3 ~ 5
- Voltage Comparator : LM393
₹ 80.00
- Operating Current :13-26mA / DC 3.3V
- Idle Current :10-13mA / DC 3.3V
- Sleep Current: < 80uA
- Peak Current: < 30mA
- Operating Frequency: 13.56MHz
- Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
- Environmental Operating Temperature: -20 – 80 degrees Celsius
- Environmental Storage Temperature: -40 – 85 degrees Celsius
- Relative humidity: relative humidity 5% – 95%
- Reader Distance: ≥ 50mm / 1.95″ (mifare 1)
- Module Size: 40mm × 60mm
- Module interface: SPI
- Data transfer rate: Maximum 10Mbit/s
₹ 49.00
- Open reed switch
- Working voltage: 3.3V ~ 5V
- Current: Upto 1.2A
- Comparator output, clean signal, great waveform, and strong driving ability
- Digital switch output (0 and 1)
- Fixed bolt hole for easy installation
₹ 10.00
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56MHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Anticollision
- Typical ticketing transaction: <100 ms ( including backup management)
₹ 8.00
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56MHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Anticollision
- Typical ticketing transaction: <100 ms ( including backup management)
₹ 35.00
- Operating voltage: 3.3V~5V
- Dual output mode,analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable
- Panel PCB Dimension: Approx.3cm x 1.5cm
- Soil Probe Dimension: Approx. 6cm x 3cm
- Cable Length: Approx.21cm
- VCC: 3.3V-5V
- GND: GND
- DO: digital output interface(0 and 1)
- AO: analog output interface
₹ 53.00
- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
₹ 199.00
- Operating Voltage: The module can operate within a wide voltage range, from DC 8V to 24V. This flexibility allows it to be powered by various sources, making it versatile for different setups.
- Chipset: It utilizes the TPA3118 chipset, a reputable choice for achieving high-quality audio amplification.
- Material: The board is constructed from FR4 material, known for its durability and reliability.
- Dimensions: The module’s compact size ensures it can fit into tight spaces. It measures 47mm in length, 35.5mm in width, and 12mm in height.
- Weight: The module is lightweight, weighing only 12 grams, which is advantageous for portable and space-constrained applications.
₹ 51.00
- Onboard TTP224 capacitive touch sensor IC
- 4 board-level status indicator
- Working voltage: 2.4V – 5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
- PCB board size: 35 (mm) x 29 (mm)
₹ 480.00
- Model: TPA3116D2 (2x80W)
- Chip Protection: Overvoltage, Under-voltage, Superheat, DC detection, Short circuit
- Supply Voltage: DC 12V to 24V
- Output Power: 80W x 2
- Power Efficiency: > 90%
- Dimensions: Length 32mm, Width 60mm, Height 14mm
- Weight: 45 grams