Only logged in customers who have purchased this product may leave a review.
Tower Pro SG90 Servo – 9 gms Mini/Micro Servo Motor
₹ 82.00
- 3 pole ferrite, all nylon gear
- Top ball bearing
- Operating Voltage: 4.8V~6.0V
- Operating speed: 0.12sec/60 degree
- Output torque: 1.6kg/cm 4.8V
- Dimension: 21.5 x 11.8 x 22.7mm
- Weight: 9g
₹ 94.00
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
- Connect up to 3 ESCs to test and compare their reaction time respectively
- Built with LED indicators
- Output signal: 1.5ms±0.5ms
- Size: 36.5 x 31.0 x 22mm
₹ 210.00
- Weight : 55g
- Dimension : 40.7 × 19.7 × 42.9 mm
- Operating Speed (4.8V no load): 20sec / 60 deg
- Operating Speed (6.0V no load): 16sec / 60 deg ( no load)
- Stall Torque (4.8V): 10kg/cm
- Stall Torque (6.0V): 12kg/cm
- Operation Voltage : 4.8 – 7.2Volts
- Gear Type: All Metal Gears
- Stable and shock proof double ball bearing design
- Dead band width: 5 µs
- Temperature range: 0 ºC – 55 ºC.
- Control System: Analog
- Operating Angle: 120degree
- Required Pulse: 900us-2100us
₹ 12.00
- Length: 25mm
- Diameter: 21mm
- Shaft Diameter: 2mm
- Axis length: 8mm
- Voltage: 3-6V
- Body size: 25*15*20mm
- Motor shaft length: 8mm, Shaft diameter: 2mm
- Rated Voltage: 3V
- Reference Current: 0.35-0.4A
- 3V Speed: 20400 rpm per minute
₹ 124.00
- Modulation: Analog
- Torque: –
- 4.8V: 2.20 kg-cm
- 6.0V: 2.50 kg-cm
- Speed: 4.8V: 0.11 sec/60°
- 6.0V: 0.10 sec/60°
- Weight: 0.49 oz (14.0 g)
- Dimensions: Length:0.91 in (23.1 mm)
- Width: 0.48 in (12.2 mm)
- Height: 1.14 in (29.0 mm)
- Gear Type: Metal
- Rotation/Support: Dual Bearings
- Rotational Range: 180°
- Pulse Cycle: 20 ms
- Pulse Width: 400-2400 µs
₹ 100.00
- RPM: 100.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
Reviews
There are no reviews yet.