Basic Sensor Starter KIT

• Acrylic Transparent Chassis 2
• Coded Disk 4
• Acrylic Fasteners 8
• M3 Copper Stand-Off (Male-Female) 6
• M3 Cross-Head Bolt (Length: 8 mm ) 6
• M3 Cross-Head Bolt (Length: 30 mm ) 8
• M3 Nut 16
• Wheels 4
• BO Motors 4

• Color: White + Green OR  White + Blue
• Infrared Sensor with Control Circuit Board
• The Sensitivity and Holding Time Can be Adjusted
• Working Voltage Range: DC 4.5V- 20V
• Current Drain: <60uA
• Detection Range: <140°
• Voltage Output: High/Low level Signal: 3.3V TTL output
• Detection Distance: 3 to 7m (can be adjusted)
• Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
• Blockade time: 2.5s (Default)
• Work temperature: -20-+80°C
• Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
• Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
• Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).

• Working Voltage:5V (DC)
• Static Current: Less than 2mA
• Output Signal:5V
• Sensor Angle: Less than 15 Degrees
• Detection Distance: 2 cm to 450 cm
• High Precision: Up to 2 mm
• Input Trigger Signal: 10µs TTL impulse
• Echo Signal: Output TTL PWL Signal
• High sensitivity ultrasonic range sensor
• Works with Arduino board

Expand your Arduino horizons with the Basic Starter Kit! This comprehensive kit builds upon the essentials and introduces a wider range of sensors, actuators, and control elements. Explore sound, movement, distance sensing, and more – all compatible with Arduino SMD UNO. Perfect for makers and hobbyists to take their projects to the next level!

Launch into the world of electronics with this All-in-One Starter Kit! Build circuits, experiment with lights and sounds, and explore electronic fundamentals – all from your workbench. This comprehensive kit includes everything you need to get started, from LEDs and resistors to transistors and voltage regulators. Perfect for beginners, hobbyists, and students!

• Input Voltage: DC 3.3V to 5V
• Output: Analog and Digital
• Sensitivity adjustable

Wire Length :- 20 CM

Kit Includes :-

1. 10 Male-Male Jumper Wire
2. 10 Male-Female Jumper Wire
3. 10 Female-Female Jumper Wire

• Male to Male, Male to Female, Female to Female Jumper Wires, 120 Pieces
• Each cable length about 20cm or 8-inch
• Good quality Product

• Power Supply： 3.3~5.5V DC
• Output： 4 pin single row
• Measurement Range： Humidity 20-90%RH， Temperature 0~50℃
• Accuracy： Humidity +-5%RH， Temperature +-2℃
• Resolution： Humidity 1%RH， Temperature 1℃
• Interchangeability： Fully Interchangeable
• Long-Term Stability： <±1%RH/year

• The best option to starting learn about IOT.
• High quality IOT Basic Learning kit with 100% compatible with NodeMCU.
• All components compatible with NodeMCU, can be used directly.